Aluminum Outdoor Furniture Carepatiogardenfurniture
Whether you have an aluminum outdoor patio set or a few cast aluminum benches sitting in your backyard, knowing how to care for aluminum furniture will ensure yours will have a long life. While aluminum outdoor furniture is usually quite durable, the fact of the matter is keeping it clean and in good shape is ideal for anyone looking to get the most out of their purchases.
Keeping this furniture clean with occasional aluminum outdoor furniture care is usually simple enough. Aluminum is rust-free and capable of tolerating harsh weather. Even with this being the case, staining can occur over time.
In this article, we discuss how to clean aluminum furniture and what to do if your aluminum patio furniture is oxidizing. You’ll also learn how to keep cast aluminum patio furniture clean and how to touch it up using cast aluminum paint. Keep reading to gain the insight you need to take care of your aluminum patio setup.
Cleaning Aluminum Furniture
The first step in cleaning your aluminum tables and chairs is to take the cushions away. You’ll remove those cushions and begin washing the furniture with water as you scrub the dirt off. If you’re dealing with a tough stain, you can combine some soap and water and use a sponge to wipe it down.
If you need to wash the cushions as well, make sure to hand wash them. Most cushions do not fare well in washing machines and dryers, so when you’re done, make sure to let them dry in the sunlight.
Once you wash the aluminum furniture with soap and water, spray some all-purpose cleaner on the aluminum parts. You’ll want to use a sponge or soft cloth to remove all of the dirt. After, hose it down with some water and let it dry.
Pro Tip: Make sure you use a water-based, bleach-free all-purpose cleaner to avoid damaging the color of your outdoor aluminum furniture.
Using a non-abrasive cleaner, begin buffing the aluminum patio seating to take off any scuff marks. Wipe using circular motions and a soft cloth. Once you finish, hose the seating down with water once more and allow it to dry.
If you’d like to further protect your outdoor aluminum set even more, use some auto wax to give it a thin coat. This will protect the furniture from extreme heat and help to avoid corrosion and pitting of the metal.
How To Clean Oxidized Aluminum Patio Furniture
When aluminum is exposed to air, it tends to develop an oxide layer. This layer protects the furniture from elements and wards off corrosion, but it’s not aesthetically pleasing. Fortunately, cleaning aluminum furniture oxidation is easier than you might think.
A simple combination of soap and warm water usually does the trick. The cleaning solution can be more effective if you add a gentle, natural acid, so add a little lemon juice, cream of tartar, or vinegar.
Cleaning Cast Aluminum Patio Furniture
As you’re cleaning a cast iron bench, you’ll want to make sure you’re thorough to ensure you avoid unnecessary damage. You’ll begin by washing the surface of your cast-aluminum furniture. Use a solution composed of a ¼ cup of dishwashing soap and a gallon of water. You’ll take off all of the dirt and grime, ensuring all of the cracks and joints are washed. Once this is done, rinse the furniture down and wipe it dry using a clean cloth.
After you dry it off, look it over. See if there are any cracks in the welds, missing paint, or missing parts. You’ll need to replace any missing components. These parts will usually be available at any local hardware or home improvement store. Once you replace these parts, it’s time to touch up the furniture further.
How To Touch Up Cast Aluminum Patio Furniture
The paint on your cast aluminum table set might be flaking or fading. Or perhaps the welding is broken in some spots. Regardless of who the cast aluminum sets are damaged, it’s essential to touch them up from time to time.
You’ll need to reweld any broken welds. This is achievable using a metal inert gas (MIG) welder. But if you’re not experienced using one, it’s always a good idea to seek professional help. Any breaks you notice should be worked with a metal file. Then, if there is any residue, you’ll need to remove that. Once this is done, it’s time to reweld the break, smooth it with a file, and use sandpaper to prepare the surface for paint.
At this point, you’ll sand the areas where the paint is worn away, faded, or missing. Using a clean cloth, dust away all of the paint particles you’ve just sanded. Then, you’ll spay on some self-etching primer. Make sure to use a piece of cardboard to shield any parts you don’t want to paint.
Once this is done, you’ll repaint the primed areas using matching enamel paint. Let the paint dry for 24 hours before you use the furniture.